Non hai articoli nel carrello.

Product was successfully added to your shopping cart.


Disponibilità: Non disponibile

2,99 €


ONLY use on 64 Pitch Spur Gear For replace PN Racing MR2044 or MR2045 Ball Diff Download Printing
Size 2WD Gear Ratio Chat Modifying the Kyosho diff to fit the PN Ball Bearing Spur Gears. Pic 1 & 2: The inner hub of the
diff extends slightly outward from the diff ring. With the new gears that bump gets in the way and will not let the gear sit
flush with the diff ring. Pic 3 : Use some 400 grit sand paper. Pic 4: Lay the paper on a flat surface then in a circular motion
sand down the hub. Keep checking the hub and stop when it sits flush with the diff ring. Pic 5 6 & 7: Here is the sanded
down diff now sanded down enough for the PN gears. Pic 8: Here is the Diff with the gear installed before the outer
hub goes on. Pic 9: This is the Kyosho Diff with the new PN Ball Bearing Spur Gear installed. This was very easy to do
and only took about 15 minutes to complete.

Ulteriori informazioni

Codice Prodotto MR2610
Colore No
Produttore PN Racing
  1. Recensisci per primo questo prodotto

Scrivi la tua recensione

Ogni utente registrato può scrivere una recensione. Per favore, accedi o registrati